AKG C519M

Descripción

Imágenes

Enviar a un amigo

Opiniones

Brass Drums Percussions Woodwinds C519M

Miniature condenser clip-on microphone for wind instruments, drums, and percussions
Miniature gooseneck for accurate microphone alignment
Including wireless direct adapter for easy use with AKG pocket transmitters
Detachable microphone cable
Transducer shock mount for high mechanical-noise rejection

The C 519 clips onto the bell of a trumpet, saxophone, trombone, tuba, or any other wind instrument (e.g. didgeridoo). Room to move for the wind section at last! Its tight cardioid polar pattern makes the C 519 an ideal tool for use near monitor wedges, and its flat frequency response delivers a natural, powerful, and clear sound.

The C 519 M features an integrated, switchable bass cut for adjusting the microphone’s frequency response to your instrument's sound. The unique adapter plate A 400 allows easy attachment of the AKG pocket transmitters.

Versions:

C 519 M for external phantom powering

Polar pattern	cardioid
Frequency range	60 Hz to 20 kHz
Sensitivity	5 mV/Pa (-46 dBV)
Max. SPL	130/132 dB SPL (for 1 %/3 % THD)
Equivalent noise level	31 dB(A)
Signal/noise ratio (A-weighted)	63 dB
Impedance	<= 200 ohms
Recommended load impedance	>= 2000 ohms
Current consumption	<= 2 mA
Power requirement	B 29 L battery power supply, MPA V L phantom adapter, AKG WMS bodypack transmitters
Connector	3-pin mini XLR
Cable	1.5 m (5 ft.)
Finish	matte black
Dimensions	Length: 213 mm (8.4 in.) (microphone only); max. width: 47 mm (1.9 in.)
Net weight	C 519 M: 195 g (6.9 oz.) (microphone and cable)
Shipping weight	C 519 M: 430 g (15.2 oz.) C 519 ML: 310 g (11 oz.)