CROWN XLS 402
Descripción
Imágenes
Enviar a un amigo
Opiniones
Productos Relacionados
| Minimum Guaranteed Power per channel, both channels driven |
|||||
| XLS 402 | |||||
| 1 kHz with 0.5% THD Stereo, 2 ohms (per ch.) Stereo, 4 ohms (per ch.) Stereo, 8 ohms (per ch.) Bridge-Mono, 8 ohms Bridge-Mono, 4 ohms |
-- 450W 300W 900W -- |
|
|
||
- Reliable design incorporates many popular features
- Housed in a rugged, all-steel 2U chassis (3U in the XLS 5000)
- Efficient forced-air fans prevent excessive thermal buildup
- Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs
- Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel.
Specifications
| Sensitivity (volts RMS) for full rated power at 4 ohms |
1.25
|
| Frequency Response (at 1 watt, 22 Hz - 20 kHz) |
+0 dB, –1 dB
|
| Signal to Noise Ratio below rated power (20 Hz to 20 kHz, inputs terminated) A-weighted, below rated power No weighting, below rated power |
> 100 dB
> 95 dB |
| Total Harmonic Distortion (THD) at 1 full bandwidth power, from 20 Hz to 1 kHz |
< 0.5%
|
| Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –30 dB |
< 0.3%
|
| Damping Factor (8 ohm): 10 Hz to 400 Hz |
> 200
|
| Crosstalk (below rated power) at 1 kHz at 20 kHz |
–75 dB
–50 dB |
| Input Impedance (nominal) (balanced, unbalanced) |
20 kilohms, 10 kilohms
|
| Load impedance Stereo Bridge mono |
4-8 ohms
8 ohms |
| AC Line Voltage and Frequency Configurations Available (± 10%) |
120 VAC 60 Hz
100 VAC 50/60 Hz 220 VAC 50 Hz 230-240 VAC 50 Hz |
| Ventilation |
Flow-through ventilation from front to back
|
| Cooling |
Internal heat sinks with forced-air cooling
|
| Air Volume Requirements (per minute per unit) |
80.15 ft3 (2.27 m3)
|
| Dimensions: Width, Height, Depth |
XLS 202, 402, 602, 802: EIA Standard 19"W (EIA RS-310-B) x 3.5” (8.9 cm) H x15.2" (38.6cm) D.
|
| Net Weight, Shipping Weight |
XLS 402: 25.7 lb (11.7 kg), 30.7 lb (13.9 kg) |
Ningún mensaje encontrado
Añadir nuevo mensaje
|
|
||||||||
|
|
||||||||
|
