.


CROSSOVER DBX 223


dbx223.jpg

Ver imagen grande

Cod.artículo: DBXC223

Precio: BsF.9,300.15
930015 puntos
9300 puntos

Descripción
Enviar a un amigo
Opiniones
dbx 223
Let's take a look at the construction features of the dbx 223. At first glance, you'll notice
the units are great looking. As you turn the controls something else becomes apparent;
these units are extremely well built. The controls exude great precision, and the feel is a
solid "click". Also, when you open the box, you won't find the external power supply that
accompanies most processors in this price range. That's because we know how difficult
external power supplies can be to work with and even though it costs a little more we put
the high quality power supply right in the unit. All the inputs and outputs are TRS differentially
balanced 1/4" jacks that are bolted down to the chassis. This "nutting down" of the jacks
insures that even if someone stomps on a cable plugged into the unit, it's not going to tear
up the circuit board inside. All dbx crossovers all feature Linkwitz-Riley 24dB per octave filters,
the professional standard. But then again, what did you expect?

Via a switch on the back panel, you first select whether you're operating your system in
stereo 2-way or mono 3-way. Then you also set, on the back panel, whether or not you
want to mono sum the LF (subwoofer) out. (Most systems that use a subwoofer are mono
summed to take advantage of amplifier power and because low frequencies are non-directional.)
Back panel switches allow you to select the range of the crossover frequencies individually for
both channels. The crossover frequency controls have a green LED that indicates when the x10
switch on the back panel is activated (we wouldn't make you check the switch position on the
back every time you wonder where it's set). All these switches are on the back panel because
it could be disastrous if you were to change them mid-program. On the front panel you'll notice
there are LEDs that indicate whether the unit is in mono or stereo mode. Each channel has an
input gain control for proper level setting. There's a recessed 40 Hz low cut (HPF) on each
channel to remove unwanted low frequencies. Both the low and high outputs on each channel
have a gain control ranging from - to +6 dB to allow muting of individual outputs and for level
matching. Also, these outputs each have phase reverse switches that will help get you out
of a bind without having to reconfigure your system. These phase reverse switches may be
internally reconfigured as mute switches.

You'll get great performance, all the features you'd expect from a professional product and
the knowledge that you're buying a processor from the people that have been producing
the worlds finest processors for over 20 years. The technology that made us famous brings
you a dbx crossover that has been tested to the highest professional standards at a price
that's just too low to admit!


Features Of The dbx 223 Crossover
 
  • TRS balanced inputs and outputs
  • Low frequency summed subwoofer output
  • x10 range switch on both channels
  • Stereo 2-way or mono 3-way operation
  • 40hz high pass filter
  • Phase reverse switch on all outputs
  • Individual level controls on all outputs
  • 24dB per octave Linkwitz-Riley filters (the professional standard)
  • Stereo/Mono status LEDs indicate the selected mode


Ningún mensaje encontrado
 


Añadir nuevo mensaje

*
*

Para aseguar que es un persona y no un programa automatizado llenando este formulario, por favor introduzca los caracteres que ve en el recuadro.

  Redraw

Caracteres: 

  
*
  
  
*

Para aseguar que es un persona y no un programa automatizado llenando este formulario, por favor introduzca los caracteres que ve en el recuadro.

  Redraw

Caracteres: 

.



Nuestras marcas

 
Ayuda Rápida Mi cuenta Información

Inicio ¿Cómo Pagar? Preguntas Frecuentes Condiciones/Envios Contacto Mapa del sitio

Cargando...