| Minimum Guaranteed Power per channel, both channels driven |
|||||
| XLS 5000 | |||||
| 1 kHz with 0.5% THD Stereo, 2 ohms (per ch.) Stereo, 4 ohms (per ch.) Stereo, 8 ohms (per ch.) Bridge-Mono, 8 ohms Bridge-Mono, 4 ohms |
|
|
|
|
2,500W** 1,800W* 1,100W* 3,600W* 5,000W** *with 0.1% THD **with 1% THD |
| Sensitivity (volts RMS) for full rated power at 4 ohms |
1.25
|
| Frequency Response (at 1 watt, 22 Hz - 20 kHz) |
+0 dB, –1 dB
|
| Signal to Noise Ratio below rated power (20 Hz to 20 kHz, inputs terminated) A-weighted, below rated power No weighting, below rated power |
> 100 dB
> 95 dB |
| Total Harmonic Distortion (THD) at 1 full bandwidth power, from 20 Hz to 1 kHz |
< 0.5%
|
| Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –30 dB |
< 0.3%
|
| Damping Factor (8 ohm): 10 Hz to 400 Hz |
> 200
|
| Crosstalk (below rated power) at 1 kHz at 20 kHz |
–75 dB
–50 dB |
| Input Impedance (nominal) (balanced, unbalanced) |
20 kilohms, 10 kilohms
|
| Load impedance Stereo Bridge mono |
4-8 ohms
8 ohms |
| AC Line Voltage and Frequency Configurations Available (± 10%) |
120 VAC 60 Hz
100 VAC 50/60 Hz 220 VAC 50 Hz 230-240 VAC 50 Hz |
| Ventilation |
Flow-through ventilation from front to back
|
| Cooling |
Internal heat sinks with forced-air cooling
|
| Air Volume Requirements (per minute per unit) |
80.15 ft3 (2.27 m3)
|
| Dimensions: Width, Height, Depth |
XLS 5000: EIA Standard 19"W (EIA RS-310-B), 5.25” ( 13.3 cm) H x 15.5” (39.5 cm) D.
|
| Net Weight, Shipping Weight |
XLS 5000: 62.0 lb (27.7 kg), 74.0 lb (33.6 kg)
|
Ningún mensaje encontrado
|
|
||||||||
|
Rastrea tu pedido(s):
| Ayuda Rápida | Mi cuenta | Información |
|---|---|---|
Inicio ¿Cómo Comprar? Pagos Condiciones/Envios Contacto Certificados de Regalo Mapa del sitio
Copyright © 2005-2008 Audiopormenos.com. Creado por APMI