JBL JRX112M
Descripción
Enviar a un amigo
Opiniones
Productos Relacionados
JRX 112M
The JRX112M is a portable, twelve-inch, two-way speaker system
designed specifically for live performance stage monitoring applications.
With enough sensitivity and power handling to cut through the
on stage, the JRX112M has a smooth response so it can deliver maximum
gain before feedback. It also includes JBL’s dual-angle pole socket making
it equally at home as a front-of-house speaker.
Detalles:
- JBL 12" low frequency driver with a 64 mm (2-1/2 in) diameter
area in the voice coil gap than round wire designs, for greater efficiency
and power handling.
- Ferro-fluid cooled compression driver with titanium diaphragm
- The advanced network topology crossover design shapes
- High-voltage capacitors and inductors with massive cores and heavy
- Progressive Transition™ highfrequency waveguide provides superior
- The rugged, acoustically superior enclosure is constructed from
mechanical fastener technology for extreme durability and improved low-frequency performance.
- SonicGuard™ protects the highfrequency driver from excess power without
- Non-resonant, all-steel handles are used.
- Attractive 18-gauge hexagon perforated, steel grille protects components from damage.
- Dual-angle pole-mount socket allows the speaker to tilt 10° for more
Especificaciones:
- System Type: 12" 2-way, stage monitor
- Frequency Range (-10 dB)1: 60 Hz - 16 kHz
- Frequency Response (±3 dB)1: 70 Hz - 12 kHz
- Sensitivity (1w/1m): 99 dB SPL
- Nominal Impedance: 8 Ohms
- Power Capacity2: 250 watts
- Peak Power Capacity2: 1000 watts
- Recommended Amplifier 250-500 watts @ 8 Ohms
- Power:
- Maximum SPL: 129 dB
- Nominal Dispersion: 90 x 50
- Crossover Frequency: 1.8 kHz
- Dimensions (H x W x D):3 584 mm x 399 mm x 325 mm (23 in x 15.7 in x 12.8 in)
- Weight: 19.5 kg (43 lb)
- Shipping Weight: 22.0 kg (49 lb)
- High Frequency Driver: JBL 2412 1" exit compression driver mounted on
- Low Frequency Driver: JBL M112-8
- Input Connectors: Neutrik® Speakon® NL-4 (x1); 1/4" TS phone jack (x1); parallel
- Enclosure Construction: 19 mm (¾ in) MDF (Medium Density Fiberboard);
- Grille: 18-gauge, powder-coated steel
- Mounting & Suspension: 35 mm, cast aluminum dual-angle pole-mount socket
Ningún mensaje encontrado
Añadir nuevo mensaje
|
|
