JBL PRX525
JBL PRX 512M
PRODUCT DESCRIPTION
JBL PRX525 Sound Reinforcement System - 15-Inch, 2-Way, 1.5-Inch Annual Polymer Diaphragm Compression Driver, Professional XLR Line and 1/4-Inch Mic/Instrument Inputs with Loop Through, DuraFlex™ Coated Plywood Construction.
If a simple set-up is required and full bandwidth output at high levels is a must, then the PRX525 is most likely the optimum solution. With the same foot print as the PRX515 the addition of another 15" woofer only increases the weight by 24 lbs, yet the increase in performance negates the requirement for an extra subwoofer in live music and many music playback applications. For live music, recorded music playback and speech the user has the option of tailoring the EQ, 'flat' for speech intelligibility and 'boost' for enhanced bass and crisp highs in recorded music playback. A microphone can be directly connected to the speaker input for quick on-the-fly PA applicaitons. The PRX525 is a self-powered, lightweight two-way loudspeaker system capable of delivering a very high level of performance over a broad bandwidth. The PRX525 is comprised of two 380 mm (15 in) 265F Differential Drive® woofers, a 2408H 37.5mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 70° by 70° horn, all driven by a multi-channel Crown International Class-D digital power amplifier. A propriety DSP chip is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization. The enclosure is constructed of quality plywood and coated in JBL’s rugged DuraFlex™ finish. Durable polypropylene end-caps add extra protection for the cabinet. The CNC-machined steel grille wraps around the sides of the enclosure so there are no protruding lips on the front of the box to create acoustical interference. The grille is also lined with an acoustically transparent foam to provide additional driver protection.The amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer.
Features
 |
Dual Differential Drive® woofers. |
|
1.5" annual polymer diaphragm compression driver. |
|
Class-D, Crown® digital amplifier. |
|
DSP input section with crossover, dynamic limiting, component optimization, selectable system EQ. |
|
Professional XLR line and ¼" Mic/Instrument inputs with loop through. |
|
Illuminated logo for clear Power-On status. |
|
DuraFlex™ coated plywood construction. |
|
Polypropylene end-caps enhance durability. |
|
Wrap around heavy duty steel grille provides protection without obstructing performance. |
|
Large die-cast aluminum handle bar with a fine tuned ergonomic rubber grip for maximum comfort. |
Applications
|
Recording Studios |
|
Broadcast Studios |
|
Restaurants |
|
Live Performance |
TECHNICAL DESCRIPTION
| Model | PRX525 |
| Product Type | Self-Powered Sound Reinforcement System |
| System Type | Self powered dual 15", two-way, bass-reflex |
| Frequency Range (-10 dB) | 45 Hz – 20 kHz (EQ in flat position) |
| Frequency Response (±3 dB) | 52 Hz – 20 kHz (EQ in flat position) |
| Coverage Pattern | 70° x 70° nominal |
| Directivity Index (DI) | 10.3 dB |
| Directivity Factor (Q) | 10.8 |
| Crossover Modes | DSP controlled 48 dB filter slope |
| Crossover Frequency | 1.6 KHz |
| System Power Rating | 650 W continuous, 1300 W peak |
| LF1 Power amp | Class-D, 275 Watt (continuous) at driver impedance |
| LF2 Power amp | Class-D, 275 Watt (continuous) at driver impedance |
| HF Power amp | Class-D, 100 Watt (continuous) at driver impedance |
| Distortion | Less than 0.1% at rated power |
| Maximum SPL¹ | 135 dB SPL peak |
| Signal indicators | Overload: Red LED indicates input overload condition, Signal: Green LED indicates signal presents |
| Input sensitivity | Mic position: –25 dBu to 0 dBu Line position: +28 dBu to +10 dBu |
| Input Impedance | 64 K Ohms (balanced), 32 K Ohms (unbalanced) |
| EQ | Presets for Flat or Boost |
| LF Driver | 2 x JBL 265F 380 mm (15 in) Differential Drive® woofer |
| HF Driver | 1 x JBL 2408H 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver |
| Enclosure | Trapezoidal, 18 mm, plywood with polypropylene end caps |
| Transport | 2 x die-cast handles with backing cup |
| Finish | Anthracite DuraFlex™ finish |
| Input Connectors | Balanced XLR / ¼ inch combo jack with XLR loop through |
| Net Weight | 38 kg (84 lbs) |
| Dimensions (H x W x D) | 1300 mm x 440 mm x 465 mm (51 in x 17.25 in x 18.25 in) |
Ningún mensaje encontrado
