TANNOY DI5

Descripción

Imágenes

Enviar a un amigo

Opiniones

INCLUYE BASE DE MONTAJE
DISPONIBLE EN NEGRO
IDEAL PARA USOS EN EXTERIORES POR SU RESISTENCIA A LA HUMEDAD E INTERPERIE COMO TERRAZAS, PATIOS, ETC O TAMBIEN IDEAL PARA USOS INTERNOS EN SALAS, RESTAURANTES, ESTUDIOS, TEATRO CASERO, ETC.

Di5 / Di5t
SYSTEM
Frequency Response (-3dB) (1)	90Hz - 25kHz
Frequency Range (-10dB) (1)	80Hz - 30kHz
System Sensitivity (1W @1m) (2)	88dB (1W = 2.45V for 6 Ohms)
Nominal Coverage Angle	90 degrees conical
Driver Complement	High Frequency: ICT™ Low Frequency: 110mm (4.50”) mineral loaded polypropylene
Crossover	7kHz Inductively coupled
Directivity Factor (Q)	5.3 averaged 1kHz to 10kHz
Directivity Index (DI)	6.6 averaged 1kHz to 10kHz
Rated Maximum SPL	Average: 105dB Average: 103dB (30W tapping on transformer) Peak: 111dB
Power Handling (3)	Average: 50W Programme: 100W Peak: 200W
Recommended Amplifier Power	100W @ 6 Ohms
Nominal Impedance	6 Ohms

CONSTRUCTION
Enclosure	High Impact Polystyrene (HIPS) rated IP64 to EN60529 (IEC529)
Grille	Steel, with weather resistant coating
Finish	Textured black
Connectors	Euroblock type removable locking connector with screw terminals with "loop through" facility
Fittings	1 x K-Ball™ Bracket socket 2 x M8 yoke bracket inserts
Supplied Accessories	Yoke bracket
Optional Accessories	Pole mount adaptor K-Ball™ pre-wired multi angle bracket
Dimensions	240.7 x 155 x 162mm (9.47 x 6.1 x 6.38”)
NET Weight	2.7kg (5.94lbs)
Notes: (1) Average over stated Bandwidth. Measured in an IEC baffle in an Anechoic Chamber (2) Unweighted Pink noise input, measured at 1m on axis (3) Long term power handling capacity as defined in EIA - 426B test