TAPCO Juice J-2500
Descripción
Imágenes
Enviar a un amigo
Opiniones
TAPCO JUICE J-2500
Tapco Juice J-2500 Power Amplifier Specifications:
- Continuous Sine Wave Average Output Power per channel, both channels driven, 20 Hz to 20 kHz
- 2 ohms: 1400 W
- 4 ohms: 750 W
- 8 ohms: 575 W
Bridged Mono Operation, 20 Hz to 20 kHz - 4 ohms: 2500 W
- 8 ohms: 1500 W
Power Bandwidth: -5 Hz to 50 kHz (+0, -3 dB) - Frequency Response: -25 Hz to 25 kHz (+0, -1 dB)
- Distortion: THD and SMPTE IMD; 20 Hz to 20 kHz < 0.03% @ 8 ohms
- Signal-to-Noise Ration: > 100 dB below rated power into 4 ohms
- Channel Separation: > 90 dB @ 1 kHz
- Damping Factor: > 300 @ 1 kHz and below
- Input Impedance: 20 kOhms balanced; 10 kOhms unbalanced
- Input Sensitivity: 1.15 V (+3.4 dBu) for rated power into 4 ohms
- Gain: 34 dB
- Maximum Input Level: 9.75 Vrms (+22 dBu)
- Turn On Delay: 2.5 seconds
- Subsonic Filter: 9 dB @ 30 Hz
- Topology: Class H
- Cooling: Dual variable-speed fans with back to front airflow
- Indicators: Channels A and B, SIG (Signal Present), OL (Overload), Power
Current Consumption - Idle: 1.0 A
- Musical Program @ 8-1/2: 8.1 A
- Musical Program @ 4-1/2: 10.0 A
- Musical Program @ 2-1/2: 17.2 A
AC Power Requirements - U.S.: 120 VAC, 60 Hz
- Europe: 240 VAC, 50 Hz
- Japan: 100 VAC, 50/60 Hz
- Korea: 220 VAC, 60 Hz
Dimensions: 3.5"H x 19"W x 15.7"D (89x483x400mm) - Weight: 56.2 lbs. (25.5 kg)
Tapco Juice J-2500 Power Amplifier Features:
- 2500W @ 4 Ohms bridged
- Easily switchable mono/stereo/bridged mono operating modes
- Separate Speakon outputs for Channel A and Channel B
- Third Speakon output for mono bridged applications: also provides both output channels on a single NL4 connector
- 30Hz subsonic filter for low-frequency speaker protection
- Handles for easy transport and protection of level controls
- Defeatable clip limiter
- Front-panel signal and overload indication
Ningún mensaje encontrado
